How To Download The Vpn Certificate For Phone Vpn

/ Comments off

Tap on the.p12 certificate into the attachments, type the.p12 certificate password, as configured on Endian UTM Appliance during client certificate creation, and tap on OK. Give a name to the certificate, select VPN and apps if not already selected and tap on OK. Configure a Point-to-Site VPN connection to a VNet using native Azure certificate authentication: PowerShell.; 27 minutes to read +4; In this article. This article helps you securely connect individual clients running Windows, Linux, or Mac OS X to an Azure VNet.

  • Vpn Certificate For Windows Phone Strong Encryption Vpn Certificate For Windows Phone Secure All Your Devices Bypass GEO Blocks Easy - Get Vpn Now!how to Vpn Certificate For Windows Phone for Make good use of the 1 last update 2019/11/22 coupon codes and deals we provide to help you save huge! Terms and conditions apply.
  • Solved: Hello, I have a ASA 5505 with a SSL VPN Setup. My question is about certificates. To be secure do i need to buy a third party Certificate or can i self sign a certificate in the ASA and add the certificate to the client so it doesn't throw a.
  • Jan 31, 2019  Whether it's for work or personal use, you can connect to a virtual private network (VPN) on your Windows 10 PC. A VPN connection can help provide a more secure connection to your company's network and the internet, for example, if you’re working from a coffee shop or similar public place.
-->

This article helps you securely connect individual clients running Windows, Linux, or Mac OS X to an Azure VNet. Point-to-Site VPN connections are useful when you want to connect to your VNet from a remote location, such when you are telecommuting from home or a conference. You can also use P2S instead of a Site-to-Site VPN when you have only a few clients that need to connect to a VNet. Point-to-Site connections do not require a VPN device or a public-facing IP address. P2S creates the VPN connection over either SSTP (Secure Socket Tunneling Protocol), or IKEv2. For more information about Point-to-Site VPN, see About Point-to-Site VPN.

Architecture

Point-to-Site native Azure certificate authentication connections use the following items, which you configure in this exercise:

  • A RouteBased VPN gateway.
  • The public key (.cer file) for a root certificate, which is uploaded to Azure. Once the certificate is uploaded, it is considered a trusted certificate and is used for authentication.
  • A client certificate that is generated from the root certificate. The client certificate installed on each client computer that will connect to the VNet. This certificate is used for client authentication.
  • A VPN client configuration. The VPN client configuration files contain the necessary information for the client to connect to the VNet. The files configure the existing VPN client that is native to the operating system. Each client that connects must be configured using the settings in the configuration files.

Before you begin

Note

This article has been updated to use the new Azure PowerShell Azmodule. You can still use the AzureRM module, which will continue to receive bug fixes until at least December 2020.To learn more about the new Az module and AzureRM compatibility, seeIntroducing the new Azure PowerShell Az module. ForAz module installation instructions, see Install Azure PowerShell.

Verify that you have an Azure subscription. If you don't already have an Azure subscription, you can activate your MSDN subscriber benefits or sign up for a free account.

This article uses PowerShell cmdlets. To run the cmdlets, you can use Azure Cloud Shell, an interactive shell environment hosted in Azure and usedthrough the browser. Azure Cloud Shell comes with the Azure PowerShell cmdlets pre-installed.

To run any code contained in this article on Azure Cloud Shell, open a Cloud Shell session, use the Copy button on a code block to copy the code,and paste it into the Cloud Shell session with Ctrl+Shift+V on Windows and Linux, or Cmd+Shift+V on macOS. Pasted text is not automaticallyexecuted, so press Enter to run code.

You can launch Azure Cloud Shell with:

Select Try It in the upper-right corner of a code block. This doesn't automatically copy text to Cloud Shell.
Open shell.azure.com in your browser.
Select the Cloud Shell button on the menu in the upper-right corner of the Azure portal.

Running PowerShell locally

You can also install and run the Azure PowerShell cmdlets locally on your computer. PowerShell cmdlets are updated frequently. If you are not running the latest version, the values specified in the instructions may fail. To find the versions of Azure PowerShell installed on your computer, use the Get-Module -ListAvailable Az cmdlet. To install or update, see Install the Azure PowerShell module.

Most of the steps in this article can use Cloud Shell. However, to upload the root certificate public key, you must either use PowerShell locally, or the Azure portal.

Example values

You can use the example values to create a test environment, or refer to these values to better understand the examples in this article. The variables are set in section 1 of the article. You can either use the steps as a walk-through and use the values without changing them, or change them to reflect your environment. 3d video clip download for mobile home.

  • Name: VNet1
  • Address space: 192.168.0.0/16 and 10.254.0.0/16
    This example uses more than one address space to illustrate that this configuration works with multiple address spaces. However, multiple address spaces are not required for this configuration.
  • Subnet name: FrontEnd
    • Subnet address range: 192.168.1.0/24
  • Subnet name: BackEnd
    • Subnet address range: 10.254.1.0/24
  • Subnet name: GatewaySubnet
    The Subnet name GatewaySubnet is mandatory for the VPN gateway to work.
    • GatewaySubnet address range: 192.168.200.0/24
  • VPN client address pool: 172.16.201.0/24
    VPN clients that connect to the VNet using this Point-to-Site connection receive an IP address from the VPN client address pool.
  • Subscription: If you have more than one subscription, verify that you are using the correct one.
  • Resource Group: TestRG
  • Location: East US
  • DNS Server: IP address of the DNS server that you want to use for name resolution. (optional)
  • GW Name: Vnet1GW
  • Public IP name: VNet1GWPIP
  • VpnType: RouteBased

1. Sign in and set variables

In this section, you sign in and declare the values used for this configuration. The declared values are used in the sample scripts. Change the values to reflect your own environment. Or, you can use the declared values and go through the steps as an exercise.

Sign in

Open your PowerShell console with elevated privileges.

If you are running Azure PowerShell locally, connect to your Azure account. The Connect-AzAccount cmdlet prompts you for credentials. After authenticating, it downloads your account settings so that they are available to Azure PowerShell. If you are not running PowerShell locally and are instead using the Azure Cloud Shell 'Try it' in the browser, skip this first step. You will connect to your Azure account automatically.

If you have more than one subscription, get a list of your Azure subscriptions.

Specify the subscription that you want to use.

Declare variables

Declare the variables that you want to use. Use the following sample, substituting the values for your own when necessary. If you close your PowerShell/Cloud Shell session at any point during the exercise, just copy and paste the values again to re-declare the variables.

2. Configure a VNet

  1. Create a resource group.

  2. Create the subnet configurations for the virtual network, naming them FrontEnd, BackEnd, and GatewaySubnet. These prefixes must be part of the VNet address space that you declared.

  3. Create the virtual network.

    In this example, the -DnsServer server parameter is optional. Specifying a value does not create a new DNS server. The DNS server IP address that you specify should be a DNS server that can resolve the names for the resources you are connecting to from your VNet. This example uses a private IP address, but it is likely that this is not the IP address of your DNS server. Be sure to use your own values. The value you specify is used by the resources that you deploy to the VNet, not by the P2S connection or the VPN client.

  4. Specify the variables for the virtual network you created.

  5. A VPN gateway must have a Public IP address. You first request the IP address resource, and then refer to it when creating your virtual network gateway. The IP address is dynamically assigned to the resource when the VPN gateway is created. VPN Gateway currently only supports Dynamic Public IP address allocation. You cannot request a Static Public IP address assignment. However, it doesn't mean that the IP address changes after it has been assigned to your VPN gateway. The only time the Public IP address changes is when the gateway is deleted and re-created. It doesn't change across resizing, resetting, or other internal maintenance/upgrades of your VPN gateway.

    Request a dynamically assigned public IP address.

3. Create the VPN gateway

Configure and create the virtual network gateway for your VNet.

  • The -GatewayType must be Vpn and the -VpnType must be RouteBased.
  • The -VpnClientProtocol is used to specify the types of tunnels that you would like to enable. The tunnel options are OpenVPN, SSTP and IKEv2. You can choose to enable one of them or any supported combination. If you want to enable multiple types, then specify the names separated by a comma. OpenVPN and SSTP cannot be enabled together. The strongSwan client on Android and Linux and the native IKEv2 VPN client on iOS and OSX will use only the IKEv2 tunnel to connect. Windows clients try IKEv2 first and if that doesn’t connect, they fall back to SSTP. You can use the OpenVPN client to connect to OpenVPN tunnel type.
  • The virtual network gateway 'Basic' SKU does not support IKEv2, OpenVPN or RADIUS authentication. If you are planning on having Mac clients connect to your virtual network, do not use the Basic SKU.
  • A VPN gateway can take up to 45 minutes to complete, depending on the gateway sku you select. This example uses IKEv2.

4. Add the VPN client address pool

After the VPN gateway finishes creating, you can add the VPN client address pool. The VPN client address pool is the range from which the VPN clients receive an IP address when connecting. Use a private IP address range that does not overlap with the on-premises location that you connect from, or with the VNet that you want to connect to. In this example, the VPN client address pool is declared as a variable in Step 1.

5. Generate certificates

Certificates are used by Azure to authenticate VPN clients for Point-to-Site VPNs. You upload the public key information of the root certificate to Azure. The public key is then considered 'trusted'. Client certificates must be generated from the trusted root certificate, and then installed on each client computer in the Certificates-Current User/Personal certificate store. The certificate is used to authenticate the client when it initiates a connection to the VNet.

If you use self-signed certificates, they must be created using specific parameters. You can create a self-signed certificate using the instructions for PowerShell and Windows 10, or, if you don't have Windows 10, you can use MakeCert. It's important that you follow the steps in the instructions when generating self-signed root certificates and client certificates. Otherwise, the certificates you generate will not be compatible with P2S connections and you receive a connection error.

1. Obtain the .cer file for the root certificate

Use either a root certificate that was generated with an enterprise solution (recommended), or generate a self-signed certificate. After you create the root certificate, export the public certificate data (not the private key) as a Base64 encoded X.509 .cer file. Then, upload the public certificate data to the Azure server.

  • Enterprise certificate: If you're using an enterprise solution, you can use your existing certificate chain. Acquire the .cer file for the root certificate that you want to use.

  • Self-signed root certificate: If you aren't using an enterprise certificate solution, create a self-signed root certificate. Otherwise, the certificates you create won't be compatible with your P2S connections and clients will receive a connection error when they try to connect. You can use Azure PowerShell, MakeCert, or OpenSSL. The steps in the following articles describe how to generate a compatible self-signed root certificate:

    • Windows 10 PowerShell instructions: These instructions require Windows 10 and PowerShell to generate certificates. Client certificates that are generated from the root certificate can be installed on any supported P2S client.
    • MakeCert instructions: Use MakeCert if you don't have access to a Windows 10 computer to use to generate certificates. Although MakeCert is deprecated, you can still use it to generate certificates. Client certificates that you generate from the root certificate can be installed on any supported P2S client.

2. Generate a client certificate

Each client computer that you connect to a VNet with a Point-to-Site connection must have a client certificate installed. You generate it from the root certificate and install it on each client computer. If you don't install a valid client certificate, authentication will fail when the client tries to connect to the VNet.

You can either generate a unique certificate for each client, or you can use the same certificate for multiple clients. The advantage to generating unique client certificates is the ability to revoke a single certificate. Otherwise, if multiple clients use the same client certificate to authenticate and you revoke it, you'll need to generate and install new certificates for every client that uses that certificate.

You can generate client certificates by using the following methods:

  • Enterprise certificate:

    • If you're using an enterprise certificate solution, generate a client certificate with the common name value format name@yourdomain.com. Use this format instead of the domain nameusername format.
    • Make sure the client certificate is based on a user certificate template that has Client Authentication listed as the first item in the user list. Check the certificate by double-clicking it and viewing Enhanced Key Usage in the Details tab.

  • Self-signed root certificate: Follow the steps in one of the following P2S certificate articles so that the client certificates you create will be compatible with your P2S connections. The steps in these articles generate a compatible client certificate:

    • Windows 10 PowerShell instructions: These instructions require Windows 10 and PowerShell to generate certificates. The generated certificates can be installed on any supported P2S client.
    • MakeCert instructions: Use MakeCert if you don't have access to a Windows 10 computer for generating certificates. Although MakeCert is deprecated, you can still use it to generate certificates. You can install the generated certificates on any supported P2S client.

    When you generate a client certificate from a self-signed root certificate, it's automatically installed on the computer that you used to generate it. If you want to install a client certificate on another client computer, export it as a .pfx file, along with the entire certificate chain. Doing so will create a .pfx file that contains the root certificate information required for the client to authenticate.

To export the certificate

For steps to export a certificate, see Generate and export certificates for Point-to-Site using PowerShell.

6. Upload the root certificate public key information

Verify that your VPN gateway has finished creating. Once it has completed, you can upload the .cer file (which contains the public key information) for a trusted root certificate to Azure. Once a.cer file is uploaded, Azure can use it to authenticate clients that have installed a client certificate generated from the trusted root certificate. You can upload additional trusted root certificate files - up to a total of 20 - later, if needed.

You can't upload this information using Azure Cloud Shell. You can either use PowerShell locally on your computer, the Azure portal steps.

  1. Declare the variable for your certificate name, replacing the value with your own.

  2. Replace the file path with your own, and then run the cmdlets.

  3. Upload the public key information to Azure. Once the certificate information is uploaded, Azure considers it to be a trusted root certificate.

7. Install an exported client certificate

If you want to create a P2S connection from a client computer other than the one you used to generate the client certificates, you need to install a client certificate. When installing a client certificate, you need the password that was created when the client certificate was exported.

Make sure the client certificate was exported as a .pfx along with the entire certificate chain (which is the default). Otherwise, the root certificate information isn't present on the client computer and the client won't be able to authenticate properly.

For install steps, see Install a client certificate.

8. Configure the native VPN client

The VPN client configuration files contain settings to configure devices to connect to a VNet over a P2S connection. For instructions to generate and install VPN client configuration files, see Create and install VPN client configuration files for native Azure certificate authentication P2S configurations.

9. Connect to Azure

To connect from a Windows VPN client

Note

You must have Administrator rights on the Windows client computer from which you are connecting.

  1. To connect to your VNet, on the client computer, navigate to VPN connections and locate the VPN connection that you created. It is named the same name as your virtual network. Click Connect. A pop-up message may appear that refers to using the certificate. Click Continue to use elevated privileges.

  2. On the Connection status page, click Connect to start the connection. If you see a Select Certificate screen, verify that the client certificate showing is the one that you want to use to connect. If it is not, use the drop-down arrow to select the correct certificate, and then click OK.

  3. Your connection is established.

Troubleshooting Windows client P2S connections

If you have trouble connecting, check the following items:

  • If you exported a client certificate with Certificate Export Wizard, make sure that you exported it as a .pfx file and selected Include all certificates in the certification path if possible. When you export it with this value, the root certificate information is also exported. After you install the certificate on the client computer, the root certificate in the .pfx file is also installed. To verify that the root certificate is installed, open Manage user certificates and select Trusted Root Certification AuthoritiesCertificates. Verify that the root certificate is listed, which must be present for authentication to work.

  • If you used a certificate that was issued by an Enterprise CA solution and you can't authenticate, verify the authentication order on the client certificate. Check the authentication list order by double-clicking the client certificate, selecting the Details tab, and then selecting Enhanced Key Usage. Make sure Client Authentication is the first item in the list. If it isn't, issue a client certificate based on the user template that has Client Authentication as the first item in the list.

  • For additional P2S troubleshooting information, see Troubleshoot P2S connections.

To connect from a Mac VPN client

From the Network dialog box, locate the client profile that you want to use, then click Connect.Check Install - Mac (OS X) for detailed instructions. If you are having trouble connecting, verify that the virtual network gateway is not using a Basic SKU. Basic SKU is not supported for Mac clients.

To verify your connection

These instructions apply to Windows clients.

  1. To verify that your VPN connection is active, open an elevated command prompt, and run ipconfig/all.

  2. View the results. Notice that the IP address you received is one of the addresses within the Point-to-Site VPN Client Address Pool that you specified in your configuration. The results are similar to this example:

To connect to a virtual machine

These instructions apply to Windows clients.

You can connect to a VM that is deployed to your VNet by creating a Remote Desktop Connection to your VM. The best way to initially verify that you can connect to your VM is to connect by using its private IP address, rather than computer name. That way, you are testing to see if you can connect, not whether name resolution is configured properly.

  1. Locate the private IP address. You can find the private IP address of a VM by either looking at the properties for the VM in the Azure portal, or by using PowerShell.

    • Azure portal - Locate your virtual machine in the Azure portal. View the properties for the VM. The private IP address is listed.

    • PowerShell - Use the example to view a list of VMs and private IP addresses from your resource groups. You don't need to modify this example before using it.

  2. Verify that you are connected to your VNet using the Point-to-Site VPN connection.

  3. Open Remote Desktop Connection by typing 'RDP' or 'Remote Desktop Connection' in the search box on the taskbar, then select Remote Desktop Connection. You can also open Remote Desktop Connection using the 'mstsc' command in PowerShell.

  4. In Remote Desktop Connection, enter the private IP address of the VM. You can click 'Show Options' to adjust additional settings, then connect.

To troubleshoot an RDP connection to a VM

If you are having trouble connecting to a virtual machine over your VPN connection, check the following:

  • Verify that your VPN connection is successful.
  • Verify that you are connecting to the private IP address for the VM.
  • Use 'ipconfig' to check the IPv4 address assigned to the Ethernet adapter on the computer from which you are connecting. If the IP address is within the address range of the VNet that you are connecting to, or within the address range of your VPNClientAddressPool, this is referred to as an overlapping address space. When your address space overlaps in this way, the network traffic doesn't reach Azure, it stays on the local network.
  • If you can connect to the VM using the private IP address, but not the computer name, verify that you have configured DNS properly. For more information about how name resolution works for VMs, see Name Resolution for VMs.
  • Verify that the VPN client configuration package was generated after the DNS server IP addresses were specified for the VNet. If you updated the DNS server IP addresses, generate and install a new VPN client configuration package.
  • For more information about RDP connections, see Troubleshoot Remote Desktop connections to a VM.

To add or remove a root certificate

You can add and remove trusted root certificates from Azure. When you remove a root certificate, clients that have a certificate generated from the root certificate can't authenticate and won't be able to connect. If you want a client to authenticate and connect, you need to install a new client certificate generated from a root certificate that is trusted (uploaded) to Azure.

To add a trusted root certificate

You can add up to 20 root certificate .cer files to Azure. The following steps help you add a root certificate:

Method 1

This method is the most efficient way to upload a root certificate. It requires Azure PowerShell cmdlets installed locally on your computer (not Azure Cloud Shell).

  1. Prepare the .cer file to upload:

  2. Upload the file. You can only upload one file at a time.

  3. To verify that the certificate file uploaded:

Method 2 - Azure portal

This method has more steps than Method 1, but has the same result. It is included in case you need to view the certificate data. It requires Azure PowerShell cmdlets installed locally on your computer (not Azure Cloud Shell).

  1. Create and prepare the new root certificate to add to Azure. Export the public key as a Base-64 encoded X.509 (.CER) and open it with a text editor. Copy the values, as shown in the following example:

    Note

    When copying the certificate data, make sure that you copy the text as one continuous line without carriage returns or line feeds. You may need to modify your view in the text editor to 'Show Symbol/Show all characters' to see the carriage returns and line feeds.

  2. Specify the certificate name and key information as a variable. Replace the information with your own, as shown in the following example:

  3. Add the new root certificate. You can only add one certificate at a time.

  4. You can verify that the new certificate was added correctly by using the following example:

To remove a root certificate

  1. Declare the variables.

  2. Remove the certificate.

  3. Use the following example to verify that the certificate was removed successfully.

To revoke a client certificate

You can revoke client certificates. The certificate revocation list allows you to selectively deny Point-to-Site connectivity based on individual client certificates. This is different than removing a trusted root certificate. If you remove a trusted root certificate .cer from Azure, it revokes the access for all client certificates generated/signed by the revoked root certificate. Revoking a client certificate, rather than the root certificate, allows the other certificates that were generated from the root certificate to continue to be used for authentication.

The common practice is to use the root certificate to manage access at team or organization levels, while using revoked client certificates for fine-grained access control on individual users.

Revoke a client certificate

  1. Retrieve the client certificate thumbprint. For more information, see How to retrieve the Thumbprint of a Certificate.

  2. Copy the information to a text editor and remove all spaces so that it is a continuous string. This string is declared as a variable in the next step.

    Download samsung galaxy s5 software

  3. Declare the variables. Make sure to declare the thumbprint you retrieved in the previous step.

  4. Add the thumbprint to the list of revoked certificates. You see 'Succeeded' when the thumbprint has been added.

  5. Verify that the thumbprint was added to the certificate revocation list.

  6. After the thumbprint has been added, the certificate can no longer be used to connect. Clients that try to connect using this certificate receive a message saying that the certificate is no longer valid.

To reinstate a client certificate

You can reinstate a client certificate by removing the thumbprint from the list of revoked client certificates.

  1. Declare the variables. Make sure you declare the correct thumbprint for the certificate that you want to reinstate.

  2. Remove the certificate thumbprint from the certificate revocation list.

  3. Check if the thumbprint is removed from the revoked list.

Point-to-Site FAQ

How many VPN client endpoints can I have in my Point-to-Site configuration?

It depends on the gateway SKU. For more information on the number of connections supported, see Gateway SKUs.

How To Download The Vpn Certificate For Phone Vpn

What client operating systems can I use with Point-to-Site?

The following client operating systems are supported:

  • Windows 7 (32-bit and 64-bit)
  • Windows Server 2008 R2 (64-bit only)
  • Windows 8.1 (32-bit and 64-bit)
  • Windows Server 2012 (64-bit only)
  • Windows Server 2012 R2 (64-bit only)
  • Windows Server 2016 (64-bit only)
  • Windows 10
  • Mac OS X version 10.11 or above
  • Linux (StrongSwan)
  • iOS

Note

Starting July 1, 2018, support is being removed for TLS 1.0 and 1.1 from Azure VPN Gateway. VPNGateway will support only TLS 1.2. To maintain support, see the updates to enable support for TLS1.2.

Additionally, the following legacy algorithms will also be deprecated for TLS on July 1, 2018:

  • RC4 (Rivest Cipher 4)
  • DES (Data Encryption Algorithm)
  • 3DES (Triple Data Encryption Algorithm)
  • MD5 (Message Digest 5)

How do I enable support for TLS 1.2 in Windows 7 and Windows 8.1?

  1. Open a command prompt with elevated privileges by right-clicking on Command Prompt and selecting Run as administrator.

  2. Run the following commands in the command prompt:

  3. Install the following updates:

  4. Reboot the computer.

  5. Connect to the VPN.

Note

How To Download The Vpn Certificate For Phone Vpn Free

You will have to set the above registry key if you are running an older version of Windows 10 (10240).

Can I traverse proxies and firewalls using Point-to-Site capability?

Azure supports three types of Point-to-site VPN options:

  • Secure Socket Tunneling Protocol (SSTP). SSTP is a Microsoft proprietary SSL-based solution that can penetrate firewalls since most firewalls open the outbound TCP port that 443 SSL uses.

  • OpenVPN. OpenVPN is a SSL-based solution that can penetrate firewalls since most firewalls open the outbound TCP port that 443 SSL uses.

  • IKEv2 VPN. IKEv2 VPN is a standards-based IPsec VPN solution that uses outbound UDP ports 500 and 4500 and IP protocol no. 50. Firewalls do not always open these ports, so there is a possibility of IKEv2 VPN not being able to traverse proxies and firewalls.

If I restart a client computer configured for Point-to-Site, will the VPN automatically reconnect?

By default, the client computer will not reestablish the VPN connection automatically.

Does Point-to-Site support auto-reconnect and DDNS on the VPN clients?

Auto-reconnect and DDNS are currently not supported in Point-to-Site VPNs.

Can I have Site-to-Site and Point-to-Site configurations coexist for the same virtual network?

Yes. For the Resource Manager deployment model, you must have a RouteBased VPN type for your gateway. For the classic deployment model, you need a dynamic gateway. We do not support Point-to-Site for static routing VPN gateways or PolicyBased VPN gateways.

Can I configure a Point-to-Site client to connect to multiple virtual networks at the same time?

No. A Point-to-Site client can only connect to resources in the VNet in which the virtual network gateway resides.

How much throughput can I expect through Site-to-Site or Point-to-Site connections?

It's difficult to maintain the exact throughput of the VPN tunnels. IPsec and SSTP are crypto-heavy VPN protocols. Throughput is also limited by the latency and bandwidth between your premises and the Internet. For a VPN Gateway with only IKEv2 Point-to-Site VPN connections, the total throughput that you can expect depends on the Gateway SKU. For more information on throughput, see Gateway SKUs.

Can I use any software VPN client for Point-to-Site that supports SSTP and/or IKEv2?

No. You can only use the native VPN client on Windows for SSTP, and the native VPN client on Mac for IKEv2. However, you can use the OpenVPN client on all platforms to connect over OpenVPN protocol. Refer to the list of supported client operating systems.

Does Azure support IKEv2 VPN with Windows?

IKEv2 is supported on Windows 10 and Server 2016. However, in order to use IKEv2, you must install updates and set a registry key value locally. OS versions prior to Windows 10 are not supported and can only use SSTP or OpenVPN® Protocol.

To prepare Windows 10 or Server 2016 for IKEv2:

  1. Install the update.

    OS versionDateNumber/Link
    Windows Server 2016
    Windows 10 Version 1607    		January 17, 2018KB4057142
    Windows 10 Version 1703January 17, 2018KB4057144
    Windows 10 Version 1709March 22, 2018KB4089848

  2. Set the registry key value. Create or set “HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesRasMan IKEv2DisableCertReqPayload” REG_DWORD key in the registry to 1.

What happens when I configure both SSTP and IKEv2 for P2S VPN connections?

When you configure both SSTP and IKEv2 in a mixed environment (consisting of Windows and Mac devices), the Windows VPN client will always try IKEv2 tunnel first, but will fall back to SSTP if the IKEv2 connection is not successful. MacOSX will only connect via IKEv2.

Other than Windows and Mac, which other platforms does Azure support for P2S VPN?

Azure supports Windows, Mac and Linux for P2S VPN.

I already have an Azure VPN Gateway deployed. Can I enable RADIUS and/or IKEv2 VPN on it?

Phone

Yes, you can enable these new features on already deployed gateways using Powershell or the Azure portal, provided that the gateway SKU that you are using supports RADIUS and/or IKEv2. For example, the VPN gateway Basic SKU does not support RADIUS or IKEv2.

Can I use my own internal PKI root CA to generate certificates for Point-to-Site connectivity?

Yes. Previously, only self-signed root certificates could be used. You can still upload 20 root certificates.

Can I use certificates from Azure Key Vault?

No.

What tools can I use to create certificates?

How To Download The Vpn Certificate For Phone Vpn Software

You can use your Enterprise PKI solution (your internal PKI), Azure PowerShell, MakeCert, and OpenSSL.

Are there instructions for certificate settings and parameters?

  • Internal PKI/Enterprise PKI solution: See the steps to Generate certificates.

  • Azure PowerShell: See the Azure PowerShell article for steps.

  • MakeCert: See the MakeCert article for steps.

  • OpenSSL:

    • When exporting certificates, be sure to convert the root certificate to Base64.

    • For the client certificate:

      • When creating the private key, specify the length as 4096.
      • When creating the certificate, for the -extensions parameter, specify usr_cert.

Next steps

Once your connection is complete, you can add virtual machines to your virtual networks. For more information, see Virtual Machines. To understand more about networking and virtual machines, see Azure and Linux VM network overview.

How To Download The Vpn Certificate For Phone Vpn Download

For P2S troubleshooting information, Troubleshooting: Azure point-to-site connection problems.